Overview
These mirror mounts are designed specifically for Most KTM or the new Husqvarna Vitpilen and Svartpilen that use a stock brass internal adapter.
GEN-1 is for CRG or similar bar end mirrors.
The all new GEN-2 version allows for use of all type of bar end mirrors by eliminating the inner collar, you can now slide mirrors that do not spit in two into place before install!
Some manufacturers make brackets that
do not open all the way up, but instead have an almost completely
circular opening with a slot. These brackets get pinched down when the
bolts are tightened to clamp onto handlebars. Motogadget and Rizoma are
two such manufacturers and we call this type of bracket a “closed
style”. Unfortunately, these clamps will not work with our original
designs because the outer diameter of the mounts is too large for the
clamps to slide over to reach the slot. RhinoMoto has started releasing
what we call our Gen 2 kits to work with these mirrors. The bodies are
two pieces so that the mirror can slide onto the smaller diameter
section from the rear. A dress ring is included so that when assembled
these kits look exactly like the original kits. The use of the dress
ring is optional and the mounts are usable without them if desired.
All Gen 2 kits also work with open clamp mirrors. They are compatible with all of our spacers and adapters so that we can easily produce a Gen 2 version of any existing kit.
This 2-piece design consists of bodies CNC machined from billet steel and replaceable polymer buttons that act as the sliding surface.
The adapters included are manufactured in either brass or stainless steel materials to avoid any issues due to dissimilar metals in contact with each other (galvanic corrosion).
The brass version is shown. Once
mounted these have the same appearance as our other mirror mounts.
Kit H219 contains 2 mirror mounts with buttons, stainless fasteners, two adapters for use with the OEM internal weights, installation instructions and 2 RhinoMoto logo stickers.
