Overview
NOTE: YOU WILL NEED TO ORDER ONE MODULE FOR EACH PLUG YOU HAVE, SO ONE PER FORK, AND ONE OR TWO FOR THE REAR SHOCK DEPENDING ON BUILD
Controlled electronic suspension eliminator module
The CES Eliminator enables the disconnection of the electronic (mechatronic) suspension component from the motorcycle’s main wiring harness without getting an FI error code. No cutting and splicing required. Transform the bike back to factory setup anytime effortlessly.
Electronic (mechatronic) suspension components are monitored and controlled by the ECU. As soon as you disconnect them for the main wiring harness of the motorcycle, you will get an FI error code.Hardcore track riders and racers prefer old-school, fully mechanical suspension components on their bikes for their more precise adjustability and feedback. So if you want to convert a modern sportbike to a track/race-only bike, you will need the CES Eliminator to properly eliminate the mechatronic suspension units from the system.
Simply disconnect the plug of the fork/shock actuator motor and plug in the CESE module.
No cutting and splicing or other modification to the bike’s original wiring is required as the CESE is delivered with bike-specific plugs. A 100% plug-and-go solution!
(Off-road/race use only!)
Note: Each electronic suspension component requires a separate CESE module (2pcs at the front, 2pcs at the rear).
Plug'n Go
All CESE modules come with model-specific plugs, so no cutting/splicing is required. The main harness stays intact.Small but Tough
The product comes in a rugged, 100% weatherproof housing and with a 2-year replacement warranty. -50 x 30 x 17mm (1.9 x 1.2 x 0.6 inches), 33g (1.16oz)
Proper Solution
Affordable, high-quality, professional solution to replace/remove the electronic suspension components.
